Anne E. Trefethen
aet@tc.cornell.edu
http://www.tc.cornell.edu/~anne
Vijay S. Menon
vsm@cs.cornell.edu
http://www.cs.cornell.edu/Info/People/vsm
Chi-Chao Chang
chichao@cs.cornell.edu
http://www.cs.cornell.edu/Info/People/chichao/chichao.html
Grzegorz J. Czajkowski
grzes@cs.cornell.edu
http://www.cs.cornell.edu/Info/People/grzes/grzes.html
Chris Myers
myers@tc.cornell.edu
http://www.tc.cornell.edu/~myers
Lloyd N. Trefethen
lnt@cs.cornell.edu
http://www.cs.cornell.edu/home/lnt
.m
and are called "m-files") containing dozens of
high-level commands such as
svd
(singular value decomposition),
fft
(fast Fourier transform), and
roots
(polynomial zerofinding).
Graphical commands were built into the language, and a company
called The MathWorks, Inc.
was formed in 1984 by Moler and John Little,
now based in Natick, Massachusetts.
From the beginning, MATLAB proved greatly appealing to users. The numerical analysis and signal processing communities in the United States took to it quickly, followed by other groups of scientists and engineers in the U.S. and abroad. Roughly speaking, the number of MATLAB users has doubled each year since 1978. According to The MathWorks, there are currently about 300,000 users in fifty countries, and this figure continues to increase rapidly. In many scientific and engineering communities, MATLAB has become the dominant language for desktop numerical computing.
At least six reasons for MATLAB's success can be identified. The first is an exceptionally user-friendly, intuitive syntax, favoring brevity and simplicity at all turns without being so compressed as to interfere with intelligibility. The second is the very high quality of the underlying numerical programs, a result of MATLAB's intimate ties from the beginning with the numerical analysis research community. The third is powerful and user-friendly graphics. The fourth is the high level of the language, which often makes it possible to carry out computations in a line or two of MATLAB that would require dozens or hundreds of lines in Fortran or C. (The ability to link with Fortran or C programs is also provided.) The fifth is MATLAB's easy extensibility via packages of m-files known as Toolboxes. Many Toolboxes have been produced over the years, both by The MathWorks and by others, covering application areas such as optimization, signal processing, fuzzy logic, partial differential equations, and mathematical finance. Finally, perhaps the most interesting reason for MATLAB's success may be that from the beginning, the whole language has been built around real or complex vectors and matrices (including sparse matrices) as the fundamental data type. To computer scientists not involved with numerical computation, such a limitation may seem narrow and capricious, but it has proved extraordinarily fruitful.
It is probably fair to say that one of the three or four most important developments in numerical computation in the past decade has been the emergence of MATLAB as the preferred language of tens of thousands of leading scientists and engineers.
Originally, MATLAB was conceived as an educational aid and as a tool for prototyping algorithms, which would then be translated into a "real" language. The justifications for this point of view were presumably that MATLAB's capabilities were limited and that, being interpreted, it could not achieve the performance of a compiled language. Over the years, however, the force of these arguments has diminished. So much MATLAB software is now available that MATLAB's capabilities can hardly be called narrow anymore; and as for performance, many users find that a degradation in speed by a factor between 1 and 10 is more than made up for by an improvement of programming ease by a factor between 10 and 100. In MATLAB, one effortlessly modifies the model, plots a new variable, or reformulates the problem in an interactive fashion. Such rapid real-time exploration is rarely feasible in Fortran or C.
Thus, increasingly, MATLAB has become a language for "real" computing by scientists and engineers. But one sense has remained in which MATLAB is only a system for education and prototyping. If one wants to take advantage of multiple processors, then one must switch to other languages. Experts, such as many of those participating in this conference, are in the habit of doing just this. Others, less familiar with the rapidly-changing complexities of high-performance computing, remain tied to their MATLAB desktops, isolated from the trend towards multiprocessors.
The vision of the MultiMATLAB project has been to bridge this gap. Think of a user who finds him- or herself computing happily in MATLAB, but frustrated by the time it takes to rerun the program for six different boundary conditions, or a dozen different parameter choices, or a hundred different initial guesses. Such a user's problems might be solved by a system that makes it convenient to spawn MATLAB processes on multiple processors of a parallel computer or a network of workstations or PCs. In many cases the needs for communication between the processors are rather small. Convenience of spreading the problem across machines and collecting the results numerically or graphically is paramount.
The MultiMATLAB project is exploring one approach for making this kind of computing possible. We do not at the outset aim for fine-grained parallelism or for peak performance of the kind needed for the grand challenge problems of computational science. Instead, following the philosophy that has made MATLAB so successful, we require reasonable efficiency but put the premium on ease of use. A key principle is that MATLAB itself -- not a home-grown facsimile, which would have little chance of keeping up with the ever-expanding features of the commercial product -- must be run on multiple processors. Our vision is that a user must be able to learn enough in five minutes to become intrigued by the system and begin to use it.
Suppose the first author is sitting at her workstation in the Theory Center, connected to a node of the IBM SP2, running MATLAB. After a time she decides to start MATLAB on five new processors. She types
Start(5)
MATLAB is then started on five additional processors taken from
a predetermined list.
Or perhaps the second author is a sitting at a machine connected
to Cornell's Computer Science Department network. He
types
Start(['gemini'; 'orion'; 'rigel'; 'castor'; 'pollux'])
Now MATLAB is started on the five processors with the names
indicated. (Some names could be repeated, in which case multiple
MATLAB processes would be started on a single processor.)
In either case, when all the processes are started the message is returned,
6 MultiMATLAB processes running.
This total number of processors can subsequently
be accessed by the MultiMATLAB command Nproc
.
The standard MultiMATLAB command for executing commands on
one or more processors is Eval
.
If the user now types
Eval( 'sqrt(2)' )
then the MATLAB command sqrt(2)
is executed
on all six processors.
The result is six repetitions of 1.4142
,
which is not very interesting.
On the other hand the command
Eval( 'ID' )
calls the MultiMATLAB command ID
on each of the processors running. This command
returns the number of the current process, an integer
from 0 to Nproc
-1. Running it on all
nodes might give the result
ans = 0
ans = 1
ans = 5
ans = 2
ans = 3
ans = 4
The ordering of these numbers is arbitrary,
since the processors are not synchronized and output
is sent to the master process as soon as it is ready.
(It is a good idea to
type Eval('format compact')
at the beginning
to keep the
output from the various processes as condensed as possible.)
The command
Eval( 'ID^ID' )
might produce
ans = 1
ans = 1
ans = 256
ans = 3125
ans = 27
ans = 4
In the above examples, in keeping with our orientation toward
SPMD programming, each command passed to Eval
was
executed on all MATLAB processes. Alternatively, one can
select a subset of the processes by passing two arguments to
the Eval
command, the first being
a vector of process IDs. Thus
Eval( [4 5] , 'cond(hilb(ID))' )
might return
ans = 1.5514e+04
ans = 4.7661e+05
,
the condition numbers of the Hilbert matrices of dimensions
4 and 5, and
Eval( 0:2:4 , 'quad(''exp'',ID,ID+1)' )
might return
ans = 1.7183
ans = 93.8151
ans = 12.6965
the integrals of ex from n to
n+1 for n = 0, 2, and 4.
Note how the double quote is used to obtain a string
within a string. This calling of the MATLAB command
quad
gives a hint of the high-level power
available that is so characteristic of MATLAB. In this
case, adaptive numerical quadrature has been carried out
to compute the desired integral. MATLAB users are
accustomed to treating problems like integration, zerofinding,
minimization, and computation of eigenvalues as routine
matters to be handled silently by appropriate single-word commands.
None of these examples were costly enough for the use of multiple processors to serve much purpose, but it is easy to devise such examples. Suppose we want to find the spectral radii (maximum of the absolute values of the eigenvalues) of six matrices of dimension 400. The command
Eval( 'max(abs(eig(randn(400))))' )
does not do the trick; we get six copies of the number
20.8508
, since the random number generators deliver
identical results on all processors. Preceding the eigenvalue
computation by
Eval( 'randn(''seed'',ID)' )
,
however, leads to the result desired:
ans = 20.9729
ans = 20.8508
ans = 21.0364
ans = 21.0312
ans = 21.6540
ans = 20.4072
(The spectral radius of an n by n
random matrix is approximately the square root of n,
for large n.) In a typical experiment
this example might run in 23 seconds on six thin
nodes of our SP2; the elapsed time would be six times greater
if one used a for
loop on a single machine.
Of course, Monte Carlo experiments like this one are
always the easiest examples of embarrassingly parallel computations.
For simplicity, the examples above call Eval
with an explicit MATLAB command as an argument string.
For most applications, however, a user will want to execute a program
(an m-file) rather than a single line of text. A command such as
Eval( 'filename' )
achieves this effect.
One form of communication we have implemented is puts and gets, executable solely by the master MATLAB process. For example, the command
Put(1:4,'A')
,
sends the matrix A
from the master process 0
to processes 1 through 4; an
optional argument permits the name of A
to
be changed at the destination. The command
Get(3,'B')
,
gets the matrix B
back from process 3 to the master.
x = [pi pi^2];
Send(3,x)
Eval(3, 'Recv' )
passes a message containing a 2-vector from the master
process to process 3, leading to the output
3.1416 9.8696
An optional argument can be added in Recv
to specify the source. Another optional argument may be added
in both Send
and Recv
to
specify a message tag so as to ensure that
sends and receives are properly matched and to aid in error
checking.
The command
Probe
,
run on any process, again with optional source process
number and message tag, returns 1 (true) if a message
has arrived from the indicated source with the indicated tag,
otherwise 0 (false).
SPMD programs can be built upon
Send
and Recv
commands. Typically
the program contains if
and else
commands
that specify different actions for different processes.
For example, suppose the m-file cycle.m
consists of
the following program:
if ID==0 % first process: send
a = 1
Send(ID+1,a)
elseif ID == Nproc-1 % last process: receive and double
a = 2*Recv
else % middle processes: receive, double, and send
a = 2*Recv
Send(ID+1,a)
end;
Process 0 creates the variable a
with value 1
and sends it to process 1. Process 1 receives the message,
doubles the value of a
, and sends it along to process
2; and so on. If there are six processors the command
Eval( 'cycle' )
produces the output
a = 1
a = 2
a = 4
a = 8
a = 16
a = 32
The processes run asynchronously, but since each
Send
command is only executed after the corresponding
Recv
has completed, the proper sequence of computations
and final value 32 are guaranteed so long as all of the
nodes are functioning.
Alternatively, a MultiMATLAB command is available for explicit synchronization. The command
Barrier
returns only when called on each process.
Send
takes a vector of processor
IDs as its destination list, the underlying idea is
that of point-to-point communication. For more efficient
communication between multiple processes, as well as greater
convenience for the programmer, MultiMATLAB also has various commands
for collective communication. These commands must be
evaluated simultaneously on all processes.
The Bcast
command is used to broadcast a matrix from
one process to all other processes, using a tree-structured algorithm.
For example,
Eval( 'Bcast(1,ID)' )
returns the number 1 on all processes. Bcast
is much more
efficient than a corresponding Send
and Recv
.
The same kind of a tree algorithm is used for various computations
that reduce data from many processes to one. For example, the commands
Min
, Max
, and Sum
compute vectors obtained by reducing data over the copies of a vector or
matrix located on all processors. Thus the command
Eval( 'Sum(1,[1 ID Nproc])' )
executed on six processes will return the vector
[6 15 36]
to process 1.
If the first argument is omitted, the result is returned (broadcast) to
all processes.
We can do this
by taking a data-parallel approach in a simplistic fashion. We have
developed a number of routines such as Distribute
and
Collect
that
allow a user to distribute a matrix or to collect a set of matrices
into one large matrix. These functions operate using a mask that
indicates which processors hold which portions of the matrix. This
allows us also to develop routines such as Shift
and Copy
that are useful in data-parallel computing,
keeping the communication to a more abstract level.
Additional geometry routines such as Grid
and Coord
have also been constructed that allow the user to create
a grid of processors in 1,2 or 3 dimensions. These
provide a powerful tool for more sophisticated parallel coding. An optional
argument on the communication routines allows communication within a
given set of nodes, for example along a column or row of the grid.
We do not give further details, as these facilities are under development.
In many applications, the user will find it most convenient to compute on multiple processors but produce plots on the master process, after sending data as necessary. Equally often, however, it may be desirable to produce plots in a distributed fashion that are then sent to the user's screen. This can be particularly useful when one wishes to monitor the progress of computations on several processors graphically.
We have found the following simple method of doing this to be very useful. As mentioned above, many calculations with a geometric flavor divide easily into, say, four or eight subdomains assigned to a corresponding set of processors. We set up a MATLAB figure window in each process and arrange them in a grid on the screen. This is easily done using standard MATLAB handle graphics commands, and we expect shortly to develop MultiMATLAB commands for this purpose that are integrated with the grid operations mentioned earlier.
The figure below shows an example of
this kind of computing;
in this case we have a 4 by 1 grid
of windows. In this particular example, what has been
computed are the pseudospectra of a 64 by 64 matrix known as
the "Grcar matrix" [17].
This is an easy application for MultiMATLAB
since the computation requires a very large number of floating point
operations (1024
singular value decompositions of dimension 64 by 64) but minimal communication
(just the global minimum and maximum
of the data with Min
and Max
,
so that all panels can be on the same scale).
Our second computed example illustrates the use of multiple
figure windows for monitoring a process of numerical optimization.
MATLAB contains powerful programs
for minimization of functions of several variables; one of the original such
programs is fminu
. Unfortunately, such programs generally
find local minima, not global ones. If one requires the global minimum
it is customary to run the search multiple times from distinct initial points,
which in many cases might as well be taken to be random. With sufficiently
many trials leading to a single smallest minimum found over and over again,
one acquires confidence that the global minimum has been found, but the
cost of this confidence may be considerable computing time.
Such a problem is easily parallelizable, and the next figure shows a case in which it has been distributed to four processors. A function f(x,y) of two variables has been constructed that has many local minima but just one global minimum, the value 0 taken at the origin. On each of four processors, the optimization is carried out from twenty random initial points, and the result is displayed in the corresponding figure window as a straight line from the initial guess to the converged value. The background curves are contours of the objective function f(x,y). Note that in three of the windows, the smallest value obtained is f(x,y)=0.1935, whereas the fourth window has found the global minimum f(x,y)=0.
The system is written using MPICH, a popular and freely available implementation of MPI developed at Argonne National Laboratory and Mississippi State University [6]. In particular, MultiMATLAB uses the P4 communication layer within MPICH, allowing it to run over a heterogeneous network of workstations. In building upon MPICH, we believe we have developed a portable and extensible system, in that anyone can freely get a copy of the software and it will run on many systems. Versions of MPICH are beginning to become available that run on PCs running Windows, and we expect soon to experiment with MultiMATLAB on those platforms.
The MultiMATLAB Start
command builds a P4 process group file
of remote hosts, which are either explicitly specified
by the user or taken from a default list, and then initializes MPICH.
MATLAB processes are then started on the remote
hosts. Each process iterates over a simple loop, waiting for and
executing commands received from the user's interactive
MATLAB process. The user may use a Quit
command to shut down the
slaves and exit MultiMATLAB. Additionally, if the user quits MATLAB
during a MultiMATLAB session, the slaves are automatically shut down.
One limitation of MPI, which was not designed for this particular kind of interactive use, is that a running program cannot spawn additional processes. A consequence of this limitation is that once MultiMATLAB is running on multiple processors, it is not possible to add further processors to the list except by quitting and starting again. It is expected that this limitation of MPI will be removed in the extension of MPI under development known as MPI 2.
At the user level, MultiMATLAB consists of a collection of
commands such as Send
, for example. Such a command
is written as a C file called Send.c
, which is interfaced
to MATLAB via the standard
MATLAB Fortran/C/C++ interface system known as MEX.
Within MPI, many variants on sends and receives are defined.
MultiMATLAB is currently built upon the standard send and receive variants,
which employ buffered communication for most messages and synchronous
communication for very large ones. Our underlying MPI sends and receives
are both blocking operations, to ensure that no data is overwritten,
but to the MultiMATLAB programmer,
the semantics is that Recv
is blocking
while Send
is non-blocking.
Higher-level MultiMATLAB commands are usually built on
higher-level MPI commands.
For example,
Bcast
and
Min
and
Max
and
Sum
are built on MPI collective communication routines,
and Grid
and Coord
are built on MPI routines that support
cartesian topologies.
It should be stressed that MultiMATLAB allows MPI routines direct access to MATLAB data. As a result, MultiMATLAB does not incur any extra copying costs over MPICH, so it is reasonable to expect that its efficiency should be comparable. Our experiments show that this is indeed approximately the case. Here are the results of a typical experiment:
size of matrix round-trip latency
(# of doubles) (milliseconds)
MPICH MultiMATLAB
25 2.5 4.7
50 2.1 6.7
100 2.8 12.6
200 4.4 15.1
400 9.3 20.0
800 18.2 21.1
1600 35.8 38.4
3200 80.8 81.9
6400 165.8 175.7
12800 339.6 360.8
25600 708.9 698.7
51200 1397.4 1406.0
102400 2744.7 2850.3
The table compares round-trip latencies for a MultiMATLAB code with
those for an equivalent C code using MPICH, and reveals
that MultiMATLAB does add some overhead to that of MPICH.
The timings were obtained on the IBM SP2, not using the
high-performance switch.
This occurs because MATLAB performs memory allocation for
received matrices. It might be possible to alleviate
this problem by maintaining a list of preallocated buffers, but
we have not pursued this idea.
Our own first experiments were carried out in 1993 (A. E. Trefethen). By making use of a Fortran wrapper based on IBM's message passing environment (MPL), we ran MATLAB on multiple nodes of an IBM SP-1. We were impressed with the power of this system for certain fluid mechanics calculations, and this experience ultimately led to our persuading The MathWorks to support us in initiating the present project.
We are aware of seven projects than have been undertaken elsewhere that share some of the goals and capabilities of MultiMATLAB. We shall briefly describe them.
The longest-standing related project, dating to before 1990, is the CONLAB (CONcurrent LABoratory) system of Kågström and others at the University of Umeå, Sweden [4,10]. CONLAB is a fully-independent system with MATLAB-like notation that extends the MATLAB language with control structures and functions for explicit parallelism. CONLAB programs are compiled into C code with a message passing library, PICL [5], and the node computations are done using LAPACK.
A group at the Center for Supercomputing Research and Development at the University of Illinois has developed FALCON (FAst Array Language COmputatioN), a programming environment that facilitates the translation of MATLAB code into Fortran 90 [2,3]. FALCON employs compile time and run time inference mechanisms to determine variable properties such as type, structure, and size. Although FALCON does not directly generate parallel code, the future aim of this project is to annotate the generated Fortran 90 code with directives for parallelization and data distribution. A parallelizing Fortran compiler such as Polaris [1] may then use these directives to generate parallel code.
Another project, from the Technion in Israel, is MATCOM [12]. MATCOM consists of a MATLAB-to-C++ translator and an associated C++ matrix class with overloaded operators. At present, MATCOM translates MATLAB only into serial C++, but one might hope to build a distributed C++ matrix class underneath it which would adhere to the same interface as the existing matrix class.
A project known as the Alpha Bridge has been developed by Alpha Data Parallel Systems, Ltd., in Edinburgh, Scotland [11]. Originally, in a system known as the MATLAB-Transputer-Bridge, this group ran a MATLAB-like language in parallel on each node of a transputer. The Alpha Bridge system is an enhancement of this idea in which high-performance RISC processors are linked in a transputer network. A reduced, MATLAB-like interpreter runs on each node of the network under the control of a master MATLAB 4.0 process running on a PC.
A fifth project has been undertaken not far from Cornell at Integrated Sensors, Inc. (ISI) in Utica, NY, a consulting company with close links to the US Air Force Rome Laboratories [9]. Here MATLAB code is translated to C code with parallel library routines. This project (and product) aims at executing MATLAB-style programs in parallel for real-time control and related applications.
The final two projects we shall mention, though not the most fully developed, are the closest to our own in concept. One is a system built by a group at the Universities of Rostock and Wismar in Germany [15,16]. In this system MATLAB is run on various nodes of a network of Unix workstations, with message passing communication via the authors' own system PSI/IPC based on Unix sockets.
Finally, the Parallel Toolbox is a system developed originally by graduate students Pauca, Liu, Hollingsworth, and Martinez at Wake Forest University in North Carolina [8]. This system is based upon the message passing system known as PVM. In the Parallel Toolbox, there is a level of indirection not present in MultiMATLAB between the MATLAB master process and the slaves, a PVM process known as the PT Engine Daemon. Besides handling the spawning of new processes, the PT Engine Daemon also filters input and output, sending error codes to a PT Error Daemon that logs the error messages to a file.
In summarizing these various projects, the main thing to be said is that most of them involve original implementations of a MATLAB-like language rather than the use of the existing MATLAB system itself. There are good reasons for this, if one's aim is high performance and an investigation of what the "ideal" parallel MATLAB-like system might look like. The disadvantage is that the existing MATLAB product is at present so widely used, and so extensive in its capabilities, that it may be unrealistic and inefficient to try to duplicate it. Instead, our decision has been to build upon MATLAB itself and produce a prototype that users can try as an extension to their current work rather than an alternative to it. As mentioned, this approach has also been followed by the Rostock/Wismar and Wake Forest University projects, using PVM or another message passing system rather than MPI.
It is a straightforward matter to install our current software on any network of Unix workstations or SP2 system, provided that all the nodes are licensed to run MATLAB and there is a shared file system. We expect that extensions to networks of PCs running Windows, based on appropriate implementations of MPI, are not far behind. We hope to make our research code publicly available in the near future and will announce this event on the NA-Net electronic distribution list and elsewhere. Based on reactions of users so far, we think that MultiMATLAB will prove appealing to many people, both for enhancing the power of their computations and as an educational device for teaching message passing ideas and parallel algorithms. It gives MATLAB users easy access to message passing, here and now. The parallel efficiency is not always as high as might be achieved, but for many applications it is surprisingly good. We hope to address questions of performance in more detail in a forthcoming technical report.
MultiMATLAB is by no means in its final form. This is an evolving project, and various improvements in functionality, for example in the areas of collective communications and higher-level abstractions, are under development. The current system also needs improvement in the area of robustness with respect to various kinds of errors, and in its documentation. We are guided in the development process by several projects underway in which MultiMATLAB is being used by our colleagues for scientific computations.
As we have mentioned in the text, several projects related to MultiMATLAB are being pursued at other institutions, including CONLAB, FALCON, the Parallel Toolbox, and others. Though the details of what will emerge in the next few years are of course not yet clear, we believe that the authors of all of these systems join us in expecting that it is inevitable that the MATLAB world will soon take the step from single to multiple processors.
[2] L. De Rose, et al. FALCON: An environment for the development of scientific libraries and applications. Proc. First Intl. Workshop on Knowledge-Based Systems for the (re)Use of Program Libraries, Sophia Antipolis, France, November 1995.
[3] L. De Rose, et al. FALCON: A MATLAB interactive restructuring compiler. In Languages and Compilers for Parallel Computing, pp. 269-288. Springer-Verlag. August, 1995.
[4] P. Drakenberg, P. Jacobson, and B. Kågström. A CONLAB compiler for a distributed memory multicomputer. R. F. Sincovec, et al., eds., Proc. Sixth SIAM Conf. Parallel Proc. for Sci. Comp., v. 2, pp. 814-821. 1993.
[5] G. A Geist, et al. PICL: A portable instrumented communication library. Tech. Rep. ORNL/TM-11130, Oak Ridge Natl. Lab., 1990.
[6] W. Gropp, E. Lusk, N. Doss, and A. Skjellum. A high-performance, portable implementation of the MPI message passing interface standard. Parallel Computing, to appear.
[7] W. Gropp, E. Lusk, and A. Skjellum. Using MPI. MIT Press. 1994.
[8] J. Hollingsworth, K. Liu, and Paul Pauca. Parallel Toolbox for MATLAB PT v. 1.00: Manual and Reference Pages. Wake Forest University. 1996.
[9] Integrated Sensors, Inc. home page: http://www.sensors.com.
[10] P. Jacobson, B. Kågström, and M. Rännar. Algorithm development for distributed memory multicomputers using CONLAB. Scientific Programming, v. 1, pp. 185-203. 1992.
[11] J. Kadlec and N. Nakhaee. Alpha Bridge, parallel processing under MATLAB. Second MathWorks Conference. 1995.
[12] MATCOM, March 1996 release. http://techunix.technion.ac.il/~yak/matcom.html.
[13] Message Passing Interface Forum. MPI: A message-passing interface standard. Intl. J. Supercomputer Applics., v. 8. 1994.
[14] C. Moler. Why there isn't a parallel MATLAB. MathWorks Newsletter. Spring, 1995.
[15] S. Pawletta, T. Pawletta, and W. Drewelow. Distributed and parallel simulation in an interactive environment. Preprint, University of Rostock, Germany. 1995.
[16] S. Pawletta, T. Pawletta, and W. Drewelow. Comparison of parallel simulation techniques -- MATLAB/PSI. Simulation News Europe, v. 13, pp. 38-39. 1995.
[17] L. N. Trefethen. Pseudospectra of matrices. In D. F. Griffiths and G. A. Watson, Numerical Analysis 1991, Longman, pp. 234--266. 1992.
Vijay Menon, interested in parallelizing compilers, is a PhD student of Keshav Pingali in the Computer Science Department at Cornell.
Chi-Chao Chang and Greg Czajkowski, interested in runtime systems, are PhD students of Thorsten von Eicken in the Computer Science Department at Cornell.
Chris Myers is a Research Scientist at the Cornell Theory Center. His research interests are in condensed matter physics and scientific computing.
Nick Trefethen, a Professor in the Department of Computer Science at Cornell, has been using MATLAB since 1980. His research interests are in numerical analysis and applied mathematics.
This research was supported in part by The MathWorks, Inc. It was conducted in part using the resources of the Cornell Theory Center, which receives major funding from the National Science Foundation (NSF) and New York State, with additional support from the Defence Advanced Research Projects Agency (DARPA), the National Center for Research Resources at the National Institutes of Health (NIH), IBM Corporation, and other members of the center's Corporate Partnership Program. Further support has been provided by NSF Grant DMS-9500975 and DOE Grant DE-FGO2-94ER25199 (L. N. Trefethen), NSF Grant CCR 9503199 (support of Menon by Pingali), ARPA Grant N00014-95-1-0977 (support of Czajkowski by von Eicken) and a Doctoral Fellowship (200812/94-7) from the Brazilian Research Council (Chang).